Sunday 30 December 2012

Picador Speed Shaft


My Picador Speed Shaft from Dad's is now fixed up and works a treat. I have a selection of brushes and polishing wheels which all work well. I now need to make a guard to fit over the belt and pulleys. I have put some 1200 grit wet and dry paper around a  rubber boss with spray adhesive, it brings things up to a great level of polish. 

Friday 28 December 2012

Useful bits and pieces


Dad gave me a few useful bits and pieces from under his workbench. The chisels are very old and seem to be very good steel. They should clean up nicely. The journal bearing will clamp in my bench vice and I can drive it with a v-belt off my motor (see earlier post). It is very handy having the drill chuck fitted as I can load grinder wheels, wire brushes and polishing mops.

Thursday 27 December 2012

Stan in his hobby room



Picture of Dad in his post retirement hobby workshop. Taken Christmas 2012.
Dad aged 92

Thursday 20 December 2012

Primitive Plane

Primitive wood plane spotted on Ebay.

Dovetail joint Mk I (almost)


1st Dovetail joint I’ve made since I was at school 45 years ago. I don’t think Mr. Roper would be too impressed. Let’s just say “room for improvement my boy”

Wednesday 19 December 2012

Classy Tool Cupboard


Top of range tool cupboard - built as a gift for Terence Conran - yours for only £12000 inc vat!


Monday 17 December 2012

Saturday 15 December 2012

Tools display - very nice.

Nice Plane display spotted on the web.



Bird seed feeder

Feeder was a bit flimsy when I bought it - wouldn't have lasted long.
So I rebuilt it - should keep small birds happy.


Wood Plane plans

I found these plans to make this plane, on the web. Some brass work is required, Dad might have some sheet brass or a 300*300 sheet is available on Ebay (about £5). But what is the best way to cut the metal profile? - I am thinking jewelers metal blade scroll/fret saw? or perhaps it is possible to fit metal cutting blades to electric scroll saws - ideas anyone?



Whetstones

I have just received a pack of 3, 6” by 2” diamond grit whetstones from Ebay. £5 delivered - thought it was worth giving them a try at that price. I might Araldite them onto a Ceramic tile - they need lubricating with water so the whole assembly would be water resistant.



David Barron Furniture

David also makes beautiful planes. http://davidbarronfurniture.com


Rebate Plane

This plane was also bought at the Louth (Lincolnshire, UK) antiques barn - It was pretty grubby and blade was rusty but all cleaned up well and it works fine now. Plane is stamped 'CM'



Wooden Smoothing Plane


I bought this plane in an antiques barn in Louth, Lincolnshire a few months ago for £5.
I couldn't see the stamp on the blade because of the rust so gave it a good clean with some Hammerite Rust remover jel from Halfords.
I can now see the blade is stamped ‘J Jowett, Royal Albion, Sheffield’. It is 2 1/8 wide. Jowett were recorded as manufacturers in Albion Street Sheffield in 1911 in Whites guide. So plane will be approx 100 years old.







(Saturday : I just tried this plane in the garage with some scraps of wood. I hadn’t realized how good they are to use. It just glides across the surface with no binding and lovely fine shavings. v.pleased with it.)

WODEN tools advert

Woden tools advert. I have W7 jointer to restore.



Grainthorpe Blacksmith Workshop

Grainthorpe (Lincolnshire, UK) Blacksmiths workshop about 1925


Charles Lowis - Blacksmith


My Great Granddad Charles Lowis 
Grainthorpe (lincolnshire, UK) Blacksmith approx. 1865 - 1915




John Henry Lowis - Blacksmith


My Granddad John Henry (Harry) Lowis - 
Grainthorpe (Lincs, UK)
Blacksmith approx 1900 - 1950





Stan Lowis - Blacksmith

These are photos taken of my Dad, Stanley Lowis, in the Marshchapel (Lincolnshire, UK) Blacksmiths shop in about 1984. He worked there from 1944 - 1984. He is the last Blacksmith (& farrier) in my family going back to the 1800’s.





Oxfam Books

I bought a couple of interesting books from the OXFAM bookshop in Henley on Thames this afternoon:- 

Better than New - A practical guide to renovating furniture - by Albert Jackson and David Day . A BBC book from 1982.

and

The complete book of furniture restoration by Tristan Salalzar - Bison books 1980.

£5 the pair - helps a good cause too.



Woolworth Plane 1930's

This old wood plane was bought by my Dad in about 1932 - it was from Woolworths - every thing was 6 pence!. It came in 3 pieces - hence 18 pence.



John Browns words of wisdom


What is he? A man, of course. Yes, but what does he do?
He lives and is a man.
Oh quite! but he must work. He must have a job of some sort.
Why?
Because obviously he’s not one of the leisured classes.
I don’t know.
He has lots of leisure. And he makes quite beautiful chairs.
There you are then! He’s a cabinet maker.
No no!  Anyhow a carpenter and joiner.
Not at all.  But you said so.
What did I say? That he made chairs and was a joiner and carpenter.
I said he made chairs, but I did not say he ‘was a carpenter.
All right then, he’s just an amateur.
Perhaps! Would you say a thrush was a professional flutist or just an amateur?
I’d say it was just a bird. And I say he is just a man.
All right! You always did quibble.
from the selected poems of D.H.Lawrence.
A good friend told me about this poem. “Would you say a thrush was just a professional flutist or just an amateur?”
What a piece of genius is that line, for the thrush must sing his beautiful song, yet he cannot read a note of music!
Sometimes I feel I write in the magazine under false pretences for I am not a woodworker, certainly not a cabinetmaker, or a joiner, I simply make chairs. I cannot contemplate not doing so, I am a man who eats and sleeps and dreams, and makes chairs - all just to stay alive. I do it now because I must. I cannot contemplate the silence of not singing my chairs.
Reading this poem has, perhaps, brought me to an understanding of what I am. It has helped to make sense of my feelings about woodwork. I do not think that woodwork, as a hobby, is well portrayed, or promoted, by the woodworking press. Woodwork in the garden shed is fast becoming impractical due the massive over sell of machines. There is little left to do which requires the hands to shape. Sharpening has been reduced to an exact science. I could not do my work if it wasn’t for the uncertain element of success. My hands shaping an arm can alter my intentions in a second. Most of the improvements that have occurred have been instigated by such mistakes, when my hands did not do what my head wanted. My bum notes have sometimes created new chords which have proved to be a better song. And because I don’t have the ability to read the music, I can’t always repeat the same mistake exactly. Whilst reading through D. H. Lawrence’s poems I came across another gem:
Things Men Have Made.
Things men have made with wakened hands, and put soft life into, are awake through years with transferred touch, and go on glowing for long years.
And for this reason, some old things are lovely.
Warm still with the life of forgotten men who made them.
Is it possible to relate this sentiment to a soulless piece of machined cabinet work? I don’t think so. And another, a sledgehammer of a poem:
Let Us Be Men.
For God’s sake, let us be men not monkeys minding machines or sitting with our tails curled while the machine amuses us, the radio or film or gramophone, Monkeys with a bland grin on our faces.
Of course this poem appeals to me.
The John Brown Column – Good Woodworking - April 2001

Side table restoration


He is one of my current restoration projects - a 6 leg rosewood occasional table. I bought it for a tenner at a village antique barn. Top was split into 4 and heavily chipped. It was also held together - bit of an exaggeration  - with about 8 blacksmith patches. Got it to pieces OK and then repaired up the sections. I will sand off the top I think, too bad to preserve patina. Then french polish whole table. Might be a bit of a challenge to stick all 22 pieces back together again. Bit of careful planning required there me thinks.




Would like to retain the metal patches as they are part of the tables history.


Old Planes

Here are some more old tools awaiting the TLC treatment…




Woden No.7 Jointer Plane



Stanley No.5 Jack plane.




Stanley No.78 Rebate Plane.


Motorised Workbench



I'm thinking about setting up some kind of buffing device. We used to have one in the metalwork shop at school. A cotton pad was spinning at one end of a grinder motor. We used to apply some paste to the pad and hold the metal against it for a really good shine. I have an old motor on my bench that I could perhaps adapt. - I just powered it up and it runs sweet as a sewing machine. It was part of a lathe Dad built for me many years ago.

Stanley No. 90 Bull Nose Plane



I’ve started to polish up an old Stanley No.90 Bull Nose Plane.
This was in Ron's tool chest - looking sad and in need of some TLC.